Difference between revisions of "Software:Neuberger PMC-Software"
Stevecharon (talk | contribs) m (additional Sections) |
Stevecharon (talk | contribs) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Description == | == Description == | ||
| − | PMC is a DOS-based program for building automation purpose developed by Neuberger Gebäudeautomation in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks! | + | PMC is a DOS-based program for building automation purpose developed by [http://www.neuberger.net Neuberger Gebäudeautomation] in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks! |
== Status == | == Status == | ||
| − | Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset. This is, what the developer | + | Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset and [http://www.prolific.com.tw/eng/downloads.asp?ID=31 latest drivers]. This is, what the developer has used for his tests. |
| + | [http://www.dosbox.com/download.php?main=1 Current] should work too. | ||
== Making it to work == | == Making it to work == | ||
| + | |||
| + | Sample dosbox.conf for COM1: using the default software installation folder D:\ProGrafNT\PMC: | ||
| + | |||
| + | ---- Dosbox.conf start | ||
| + | [sdl] | ||
| + | |||
| + | fullscreen=false | ||
| + | fulldouble=false | ||
| + | fullresolution=original | ||
| + | windowresolution=original | ||
| + | output=surface | ||
| + | autolock=false | ||
| + | sensitivity=100 | ||
| + | waitonerror=true | ||
| + | priority=higher,normal | ||
| + | mapperfile=mapper.txt | ||
| + | usescancodes=true | ||
| + | |||
| + | [dosbox] | ||
| + | |||
| + | language= | ||
| + | machine=vga | ||
| + | captures=capture | ||
| + | memsize=16 | ||
| + | |||
| + | [render] | ||
| + | |||
| + | frameskip=0 | ||
| + | aspect=true | ||
| + | scaler=normal2x | ||
| + | |||
| + | [cpu] | ||
| + | |||
| + | core=normal | ||
| + | cycles=3000 | ||
| + | cycleup=500 | ||
| + | cycledown=20 | ||
| + | |||
| + | [mixer] | ||
| + | |||
| + | nosound=false | ||
| + | rate=22050 | ||
| + | blocksize=2048 | ||
| + | prebuffer=10 | ||
| + | |||
| + | [midi] | ||
| + | |||
| + | mpu401=intelligent | ||
| + | device=default | ||
| + | config= | ||
| + | |||
| + | [sblaster] | ||
| + | |||
| + | sbtype=sb16 | ||
| + | sbbase=220 | ||
| + | irq=7 | ||
| + | dma=1 | ||
| + | hdma=5 | ||
| + | mixer=true | ||
| + | oplmode=auto | ||
| + | oplrate=22050 | ||
| + | |||
| + | [gus] | ||
| + | |||
| + | gus=true | ||
| + | gusrate=22050 | ||
| + | gusbase=240 | ||
| + | irq1=5 | ||
| + | irq2=5 | ||
| + | dma1=3 | ||
| + | dma2=3 | ||
| + | ultradir=C:\ULTRASND | ||
| + | |||
| + | [speaker] | ||
| + | |||
| + | pcspeaker=true | ||
| + | pcrate=22050 | ||
| + | tandy=auto | ||
| + | tandyrate=22050 | ||
| + | disney=true | ||
| + | |||
| + | [bios] | ||
| + | |||
| + | joysticktype=2axis | ||
| + | |||
| + | '''[serial] | ||
| + | |||
| + | serial1=directserial realport:com1 startbps:19600 parity:n bytesize:8 stopbits:1 irq:4 | ||
| + | serial2=dummy | ||
| + | serial3=disabled | ||
| + | serial4=disabled | ||
| + | |||
| + | [dos] | ||
| + | |||
| + | xms=true | ||
| + | ems=true | ||
| + | umb=true | ||
| + | |||
| + | [ipx] | ||
| + | |||
| + | ipx=false | ||
| + | |||
| + | '''[autoexec] | ||
| + | |||
| + | cls | ||
| + | mount a a:\ | ||
| + | mount c c:\ | ||
| + | mount d d:\ | ||
| + | d: | ||
| + | cd \prografnt\pmc | ||
| + | pmc | ||
| + | exit | ||
| + | Dosbox.conf End ---- | ||
== Versions == | == Versions == | ||
* Versions from 2.11.2 to 2.14.5 worked | * Versions from 2.11.2 to 2.14.5 worked | ||
Latest revision as of 19:11, 2 October 2010
Description
PMC is a DOS-based program for building automation purpose developed by Neuberger Gebäudeautomation in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks!
Status
Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset and latest drivers. This is, what the developer has used for his tests. Current should work too.
Making it to work
Sample dosbox.conf for COM1: using the default software installation folder D:\ProGrafNT\PMC:
Dosbox.conf start
[sdl]
fullscreen=false fulldouble=false fullresolution=original windowresolution=original output=surface autolock=false sensitivity=100 waitonerror=true priority=higher,normal mapperfile=mapper.txt usescancodes=true
[dosbox]
language= machine=vga captures=capture memsize=16
[render]
frameskip=0 aspect=true scaler=normal2x
[cpu]
core=normal cycles=3000 cycleup=500 cycledown=20
[mixer]
nosound=false rate=22050 blocksize=2048 prebuffer=10
[midi]
mpu401=intelligent device=default config=
[sblaster]
sbtype=sb16 sbbase=220 irq=7 dma=1 hdma=5 mixer=true oplmode=auto oplrate=22050
[gus]
gus=true gusrate=22050 gusbase=240 irq1=5 irq2=5 dma1=3 dma2=3 ultradir=C:\ULTRASND
[speaker]
pcspeaker=true pcrate=22050 tandy=auto tandyrate=22050 disney=true
[bios]
joysticktype=2axis
[serial]
serial1=directserial realport:com1 startbps:19600 parity:n bytesize:8 stopbits:1 irq:4 serial2=dummy serial3=disabled serial4=disabled
[dos]
xms=true ems=true umb=true
[ipx]
ipx=false
[autoexec]
cls mount a a:\ mount c c:\ mount d d:\ d: cd \prografnt\pmc pmc exit Dosbox.conf End ----
Versions
- Versions from 2.11.2 to 2.14.5 worked
