GAMES:Shannara

From DOSBoxWiki
Revision as of 01:50, 13 October 2010 by Totengeist (talk | contribs) (Reverted edits by Uggplaza (Talk) to last revision by 87.226.10.242)
Jump to navigationJump to search

Shannara is an adventure game for the IBM PC based on the Shannara series of the first three books.

Windows

How to install with CD

Mounting the game CD-Rom drive. E.g.

Z:\>MOUNT D D:\ -t cdrom

Mounting a folder from your harddrive for the game installation. E.g.

Z:\>MOUNT C C:\DOSGAMES

Change into the folder D:\SHANNARA\ and execute the INSTALL.EXE. Follow the installation steps. You should use a minimal installation and the installation drive for the game is C:. The default installation folder is SHANNARA. Finish the sound setup and change into the folder C:\SHANNARA\. Start the game.

C:\SHANNARA\SHANNARA.EXE

How to install with an ISO

Mounting the game ISO. E.g.

Z:\>IMGMOUNT D C:\DOSGAMES\ISO\SHANNARA\Shannara.iso -t iso

Mounting a folder from your harddrive for the game installation. E.g.

Z:\>MOUNT C C:\DOSGAMES

Change into the folder D:\SHANNARA\ and execute the INSTALL.EXE. Follow the installation steps. You should use a minimal installation and the installation drive for the game is C:. The default installation folder is SHANNARA. Finish the sound setup and change into the folder C:\SHANNARA\. Start the game.

C:\SHANNARA\SHANNARA.EXE

How to install without CD/ISO

Copy the SHANNARA folder from CD to your local drive e.g. C:\DOSGAMES\. Change into the folder C:\DOSGAMES\SHANNARA\ and open the LEGEND.INI file with a text editor.

Original LEGEND.INI file:

MOUSE=MOUSE
PICDATA=.\
VOCDATA=.\VOC
SAVEDATA=C:\
FLCDATA=.\FLICS

To play the game without CD make the following modifications.

Modified LEGEND.INI file:

KEYBOARD=NORMAL
MOUSE=MOUSE
PICDATA=C:\
VOCDATA=C:\VOC\
SAVEDATA=C:\
FLCDATA=C:\FLICS\

Mounting the game folder from your harddrive.

Z:\>MOUNT C C:\DOSGAMES\SHANNARA

You should execute SETSOUND.EXE at first to start the configuration for the sound card.

C:\>SETSOUND.EXE

Then you can start the game via SHANNARA.EXE.

C:\>SHANNARA.EXE

Making it work

If you want to play the game in full screen mode you should change the output parameter in the [sdl] section of your config file.

Default output parameter:

output=surface

Modified output parameter:

output=ddraw

This fixes an issue with all fading transitions in the game and enhances the image quality in a few cutscenes.

Read on in the Dosbox.conf for further informations about possible parameters.

DosBox config file example using an ISO

# This is the configurationfile for DOSBox 0.72.
# Lines starting with a # are commentlines.
# They are used to (briefly) document the effect of each option.

[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
#             Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.

fullscreen=false
fulldouble=false
fullresolution=original
windowresolution=original
output=ddraw
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory DOSBox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.

language=
machine=vga
captures=capture
memsize=16

[render]
# frameskip -- How many frames DOSBox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
#           Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,
#                         2xsai,super2xsai,supereagle,advinterp2x,advinterp3x,
#                         tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
#           If forced is appended (like scaler=hq2x forced), the scaler will be used
#           even if the result might not be desired.

frameskip=0
aspect=false
scaler=normal2x

[cpu]
# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
#         auto switches from normal to dynamic if appropriate.
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
#           Setting this value too high results in sound dropouts and lags.
#           You can also let DOSBox guess the correct value by setting it to max.
#           The default setting (auto) switches to max if appropriate.
# cycleup   -- Amount of cycles to increase/decrease with keycombo.
# cycledown    Setting it lower than 100 will be a percentage.

core=auto
cycles=auto
cycleup=500
cycledown=20

[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
#         probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
#              but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
# mpu401      -- Type of MPU-401 to emulate: none, uart or intelligent.
# device      -- Device that will receive the MIDI data from MPU-401.
#                This can be default,alsa,oss,win32,coreaudio,none.
# config      -- Special configuration options for the device. In Windows put
#                the id of the device you want to use. See README for details.

mpu401=intelligent
device=default
config=

[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
#            On auto the mode is determined by sblaster type.
#            All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
#            Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory.  In this directory
#             there should be a MIDI directory that contains
#             the patch files for GUS playback.  Patch sets used
#             with Timidity should work fine.

gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
#          For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[joystick]
# joysticktype -- Type of joystick to emulate: auto (default), none,
#                 2axis (supports two joysticks,
#                 4axis (supports one joystick, first joystick used),
#                 4axis_2 (supports one joystick, second joystick used),
#                 fcs (Thrustmaster), ch (CH Flightstick).
#                 none disables joystick emulation.
#                 auto chooses emulation depending on real joystick(s).
# timed -- enable timed intervals for axis. (false is old style behaviour).
# autofire -- continuously fires as long as you keep the button pressed.
# swap34 -- swap the 3rd and the 4th axis. can be useful for certain joysticks.
# buttonwrap -- enable button wrapping at the number of emulated buttons.

joysticktype=auto
timed=true
autofire=false
swap34=false
buttonwrap=true

[serial]
# serial1-4 -- set type of device connected to com port.
#              Can be disabled, dummy, modem, nullmodem, directserial.
#              Additional parameters must be in the same line in the form of
#              parameter:value. Parameter for all types is irq.
#              for directserial: realport (required), rxdelay (optional).
#              for modem: listenport (optional).
#              for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
#                             transparent, port, inhsocket (all optional).
#              Example: serial1=modem listenport:5000

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).

xms=true
ems=true
umb=true
keyboardlayout=none

[ipx]
# ipx -- Enable ipx over UDP/IP emulation.

ipx=false

[autoexec]
# Lines in this section will be run at startup.
echo off
# German keyboard layout
keyb gr
IMGMOUNT D C:\DOSGAMES\ISO\SHANNARA\Shannara.iso -t iso
MOUNT C C:\DOSGAMES\SHANNARA
C:\
IF NOT EXIST DIG.INI GOTO SNDSETUP
IF NOT EXIST MDI.INI GOTO SNDSETUP
:PLAYGAME
SHANNARA.EXE
exit
:SNDSETUP
SETSOUND.EXE
GOTO PLAYGAME