DOSBoxWiki - User contributions [en]

Software:Neuberger PMC-Software

2010-10-02T19:11:39Z

Stevecharon: /* Description */

== Description ==
PMC is a DOS-based program for building automation purpose developed by [http://www.neuberger.net Neuberger Gebäudeautomation] in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks!

== Status ==
Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset and [http://www.prolific.com.tw/eng/downloads.asp?ID=31 latest drivers]. This is, what the developer has used for his tests.
[http://www.dosbox.com/download.php?main=1 Current] should work too.

== Making it to work ==

Sample dosbox.conf for COM1: using the default software installation folder D:\ProGrafNT\PMC:

---- Dosbox.conf start
[sdl]

fullscreen=false
fulldouble=false
fullresolution=original
windowresolution=original
output=surface
autolock=false
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]

language=
machine=vga
captures=capture
memsize=16

[render]

frameskip=0
aspect=true
scaler=normal2x

[cpu]

core=normal
cycles=3000
cycleup=500
cycledown=20

[mixer]

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]

mpu401=intelligent
device=default
config=

[sblaster]

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]

gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[bios]

joysticktype=2axis

'''[serial]

serial1=directserial realport:com1 startbps:19600 parity:n bytesize:8 stopbits:1 irq:4
serial2=dummy
serial3=disabled
serial4=disabled

[dos]

xms=true
ems=true
umb=true

[ipx]

ipx=false

'''[autoexec]

cls
mount a a:\
mount c c:\
mount d d:\
d:
cd \prografnt\pmc
pmc
exit
Dosbox.conf End ----

== Versions ==
* Versions from 2.11.2 to 2.14.5 worked

Software:Neuberger PMC-Software

2010-10-02T19:10:43Z

Stevecharon: /* Status */

Software:Neuberger PMC-Software

2008-04-13T16:03:01Z

Stevecharon: /* Status */

Software:Neuberger PMC-Software

2008-04-13T16:01:50Z

Stevecharon: /* Status */

Software:Neuberger PMC-Software

2008-04-13T15:59:15Z

Stevecharon: /* Making it to work */

Software:Neuberger PMC-Software

2008-04-13T15:52:50Z

Stevecharon: /* Making it to work */ Sample dosbox.conf

== Description ==
PMC is a DOS-based program for building automation purpose developed by [http://www.neuberger.net/index2.htm Neuberger Gebäudeautomation] in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks!

== Status ==
Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset. This is, what the developer is testing with.

== Making it to work ==

Sample dosbox.conf for COM1: using the default software installation folder D:\ProGrafNT\PMC:
<nowiki>
[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest.
# Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.

fullscreen=false
fulldouble=false
fullresolution=original
windowresolution=original
output=surface
autolock=false
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.

language=
machine=vga
captures=capture
memsize=16

[render]
# frameskip -- How many frames dosbox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
# Supported are none,normal2x,normal3x,advmame2x,advmame3x,advinterp2x,advinterp3x,tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.

frameskip=0
aspect=true
scaler=normal2x

[cpu]
# core -- CPU Core used in emulation: simple,normal,full,dynamic.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
# Setting this higher than your machine can handle is bad!
# You can also let DOSBox guess the correct value by setting it to auto.
# Please note that this guessing feature is still experimental.
# cycleup -- Amount of cycles to increase/decrease with keycombo.
# cycledown Setting it lower than 100 will be a percentage.

core=normal
cycles=3000
cycleup=500
cycledown=20

[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.

mpu401=intelligent
device=default
config=

[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the dosbox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.

gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[bios]
# joysticktype -- Type of joystick to emulate: none, 2axis, 4axis,
# fcs (Thrustmaster) ,ch (CH Flightstick).
# none disables joystick emulation.
# 2axis is the default and supports two joysticks.

joysticktype=2axis

[serial]
# serial1-4 -- set type of device connected to com port.
# Can be disabled, dummy, modem, directserial.
# Additional parameters must be in the same line in the form of
# parameter:value. Parameters for all types are irq, startbps, bytesize,
# stopbits, parity (all optional).
# for directserial: realport (required).
# for modem: listenport (optional).
# Example: serial1=modem listenport:5000

serial1=directserial realport:com1 startbps:19600 parity:n bytesize:8 stopbits:1 irq:4
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support (false,true,max).

xms=true
ems=true
umb=true

[ipx]
# ipx -- Enable ipx over UDP/IP emulation.

ipx=false

[autoexec]
# Lines in this section will be run at startup.
cls
mount a a:\
mount c c:\
mount d d:\
d:
cd \prografnt\pmc
pmc
exit
</nowiki>

== Versions ==
* Versions from 2.11.2 to 2.14.5 worked

Software:Neuberger PMC-Software

2008-04-13T15:47:57Z

Stevecharon: /* Description */ Link Added

Software:Neuberger PMC-Software

2008-04-13T15:40:28Z

Stevecharon: additional Sections

== Description ==
PMC is a DOS-based program for building automation purpose developed by Neuberger Gebäudeautomation in Rothenburg/BY/Germany. If there are problems with serial connections under Windows - use DOSBOX and it rocks!

== Status ==
Tested with DosBox 0.70 (under Windows 2000 / XP). The program runs and all functions work. If you have trouble with usb-serial-adapters, use adapters with Prolific chipset. This is, what the developer is testing with.

== Making it to work ==

== Versions ==
* Versions from 2.11.2 to 2.14.5 worked

Software:Neuberger PMC-Software

2008-04-13T15:38:06Z

Stevecharon: Status added

Software:Neuberger PMC-Software

2008-04-13T15:34:59Z

Stevecharon: Description written

Software

2008-04-13T15:31:45Z

Stevecharon: /* O-Z */

Here is a list of every article for every application that is known to work or not work on DOSBox. This list is naturally incomplete, but over time, as users take the time to check on their favorite application, this list will help new users understand what they can expect to happen when they try to get their favorite application to work. Software applications are not the primary focus of DOSBox, and the needs of [[GAMES|games]] tend to receive a higher degree of attention by the developers over the needs of an application.

== A-N ==

* [[Software:Borland Delphi 16-bit|Borland Delphi 16-bit]]
* [[Software:JuggleMaster version 1.60|JuggleMaster version 1.60]]
* [[Software:Windows|Microsoft Windows]] (versions 1.0 through Windows for Workgroups 3.11)
* [[Software:Microsoft Visual Basic 3.0|Microsoft Visual Basic 3.0]]
* [[Software:Microsoft Word|Microsoft Word]]

== O-Z ==
* [[Software:Neuberger PMC-Software|PMC]]
* [[Software:Skyglobe|Skyglobe]]
* [[Software:WordPerfect|WordPerfect]]

Software

2008-04-13T15:27:39Z

Stevecharon: /* O-Z */

Here is a list of every article for every application that is known to work or not work on DOSBox. This list is naturally incomplete, but over time, as users take the time to check on their favorite application, this list will help new users understand what they can expect to happen when they try to get their favorite application to work. Software applications are not the primary focus of DOSBox, and the needs of [[GAMES|games]] tend to receive a higher degree of attention by the developers over the needs of an application.

== A-N ==

* [[Software:Borland Delphi 16-bit|Borland Delphi 16-bit]]
* [[Software:JuggleMaster version 1.60|JuggleMaster version 1.60]]
* [[Software:Windows|Microsoft Windows]] (versions 1.0 through Windows for Workgroups 3.11)
* [[Software:Microsoft Visual Basic 3.0|Microsoft Visual Basic 3.0]]
* [[Software:Microsoft Word|Microsoft Word]]

== O-Z ==
Neuberger PMC
* [[Software:Skyglobe|Skyglobe]]
* [[Software:WordPerfect|WordPerfect]]