Configuration:CPU

From DOSBoxWiki
Revision as of 22:36, 28 May 2009 by Lwc (talk | contribs) (One level down)
Jump to navigationJump to search

The CPU section controls how DOSBox tries to emulate the CPU, how fast the emulation should be, and to adjust it. DOSBox offers 4 differents methods of ((/cpu/core/Intro|CPU emulation)).

core = simple | normal| full | dynamic | auto

CPU core used in emulation. auto switches to dynamic if appropriate.

Default is auto.

cputype = auto | 386 | 386_slow | 486_slow | pentium_slow | 386_prefetch

CPU Type used in emulation. auto is the fastest choice.

(since 0.73)

Default is auto.

cycles = nnnn | max | auto

Amount of instructions DOSBox tries to emulate each millisecond. Set to max to automatically run as many cycles as possible. auto setting switches to max if appropriate.

OBS: Setting this higher than your machine can handle is bad!

Default is auto.

cycleup = nnn

Amount of cycles to increase with keycombo.

Default is 500. Setting it lower than 100 will be a percentage.

cycledown = nnn

Amount of cycles to decrease with keycombo.

Default is 20. Setting it lower than 100 will be a percentage.