Difference between revisions of "Configuration:SerialPort"

From DOSBoxWiki
Jump to: navigation, search
m (Protected "Configuration:SerialPort" [edit=autoconfirmed:move=autoconfirmed])
(Actual info)
Line 1: Line 1:
only post real stuff here
+
<pre>
 +
[serial]
 +
 
 +
#====NEW/Changed in 0.65
 +
# serial1-4 -- set type of device connected to com port.
 +
#              Can be disabled, dummy, modem, directserial.
 +
#              Additional parameters must be in the same line in the form of
 +
#              parameter:value. Parameters for all types are irq, startbps, bytesize,
 +
#              stopbits, parity (all optional).
 +
#              for directserial: realport (required).
 +
#              for modem: listenport (optional).
 +
#              Example1: serial1=modem listenport:5000
 +
#              Example2: serial1=directserial realport:COM3
 +
 
 +
serial1=dummy
 +
serial2=dummy
 +
serial3=disabled
 +
serial4=disabled
 +
</pre>
 +
 
 +
An example of how to configure an actual serial port for I/O use:
 +
<pre>
 +
serial1=directserial realport:com1
 +
</pre>

Revision as of 22:01, 28 May 2009

[serial]

#====NEW/Changed in 0.65
# serial1-4 -- set type of device connected to com port.
#              Can be disabled, dummy, modem, directserial.
#              Additional parameters must be in the same line in the form of
#              parameter:value. Parameters for all types are irq, startbps, bytesize,
#              stopbits, parity (all optional).
#              for directserial: realport (required).
#              for modem: listenport (optional).
#              Example1: serial1=modem listenport:5000
#              Example2: serial1=directserial realport:COM3

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

An example of how to configure an actual serial port for I/O use:

serial1=directserial realport:com1